How Easy Is It To Open A Gun Safe? Things to know

Do you used to forget the safe’s combination lock codes, or has your lock become inoperable? How easy is it to open a gun safe?

If you are clueless about those problems and looking for the easiest way to unlock one gun safe, you’ve come to the right place! This content will assist you in getting from this problem.

Can you change the combination on a Field and Stream gun safe?

Are Gun Safes Easy To Break Into?

Why Are Safes So Large And Heavy?

To secure valuables from even heat and flame, several safes could be insulated. Lots of layers of fireboard are frequently used in designs with superior fire protection, optimizing insulation, and increasing the safe’s weight. The higher its fire protection, the more layers it has, and the heavier that will be.

How Easy Is It To Open A Gun Safe? 

Most gun safes feature combination locks to keep your belongings and guns from other people. Gun safes have been used in homes or offices to provide a comfortable environment and secure your valuables and firearms from criminals.

However, some owners find it difficult to unlock the safe’s lock, often due to forgetting the combination or a malfunction with a lock system. As a result, before purchasing one gun safe, it is necessary to examine its lock warranty.

If the gun safe has no warranty, there are several ways to open it yourself before contacting the manufacturer. So is it easy to break into a gun safe? Scroll down as we will address some effective measurements.

A Gun safe.

 Most Gun Safes Feature Combination Locks

Methods To Open A Gun Safe

Here are the most popular methods you can try to solve this issue. Let’s take a look!


Manipulation is indeed a technique that locksmiths frequently implement. This approach requires the use of bore-scopes to remove the lock mechanism’s spring power, after which it is simple to unlock its safety.

Your locking system would be harmed as a result of this procedure. You can try the hammering method because if the lock safe is pounded repeatedly, your locking mechanism will dislodge the anchor holding the gun safe’s locking bar.

After a few trials, this method can work, and you will be able to bring the gun and gun documentation out of safety. However, you will need to send the safe to a repair shop to replace your locking mechanism before you can use it again.

Prying Technique

The simplest way to get access to one gun safe is prying. If the gun safe is of poor quality, you can unlock it within a few minutes with a crowbar and some elbow grease. Some rivets and lock bolts used to attach steel bars to gun safes are also simpler to break apart.

Because the rear of a safe is often simpler to break into than its front, make sure the safe is securely bolted to a floor or wall to decrease the chances of a thief breaking in.

Scooping Its Lock Mechanism

This is among the most cost-effective methods because it does not cause considerable harm to a locking system. This is a type of manipulation technique that is based on drilling. The majority of locksmiths utilize this procedure to open one gun safe.

To use this method, you must insert the bore-scope into a lock body around combination keys then turn the bore-scope off. As a result, this strategy could be used before attempting other high-costing methods.

Because a hole must form in the locking body to insert the long metal rod, an effective scooping method is dependent on the kind of gun safe. This approach didn’t work with the gun safe if it did not have this kind of hole.

Using A Magnet

If you forget the combination keys of your gun safe, you can also open it with a magnet. Prepare one magnet composed of neodymium. While unlocking, keep soft fabric to hold a magnet.

This method is not too difficult. To find the solenoid, you must now transfer the magnet to the locking region. It takes a long time to find the solenoid, so be patient. You may quickly access this locking mechanism when you have it.

Using A Locksmith 

If magnets do not work, find a local locksmith! If the gun safe is a dial, look for the serial number; the locksmith would certainly help. This will open your safe if the gun safe combination has never been updated.

Find A Locksmith To Look For The Serial Number

Find A Locksmith To Look For The Serial Number

Drilling A Lock System

Drilling a lock system is among the most difficult and time-consuming ways. Yet, this method would not harm the gun safe’s complete locking system. Drilling is a type of manipulation, but you only have to assault the lock system’s screws.

To make one smooth connection with its lock mechanism, one drill machine would be the compulsory tool. To detach this lock system, you must drill its palate. Drilling the machine’s pressure causes the system to lose all of its screws, and then the safe door will open.

After that, you’ll need new screws to re-install that locking mechanism inside the safe after you’ve unlocked it.

Drilling Is A Difficult Way To Open The Gun Safe

Drilling Is A Difficult Way To Open The Gun Safe

Using Paper Clips And Wires

This is the way that everyone has seen in movies. But it works in real life! People can use simple items such as a paper clip, one thin wire, or one plastic straw to open a safe. This is the most normal way to do things, and it never causes any harm.

This method, however, depends on the type of the safe, as it would not work with up-to-date safes. You must find the correct hole to insert a thin wire, then move this around its lock body.

Pay attention to the sound by keeping your ear close to its lock system. By concentrating on that location, you identify any key combination.


Until these last words, you have undoubtedly reached useful information about the topic – How easy is it to open a gun safe? 

Hopefully, among all the mentioned potential solutions, you can choose an effective one to implement. Our final advice is never to give out the authentication or combination to other people to avoid unwanted situations.


Leave a Reply

Your email address will not be published. Required fields are marked *